Wi-Fi employee access – Cisco Meraki Z3 Teleworker

In this topic, you will learn how to configure the Cisco Meraki Z3 Teleworker Gateway to work together with Portnox™ Cloud and 802.1X RADIUS authentication for Wi-Fi connections.

Warning: This topic contains documentation prepared by our support agents more than 12 months ago. It may not cover the newest models or the newest interfaces of NAS devices. We’re working on bringing you updated documentation for NAS devices in the near future. However, the methods of setting up third-party devices may still change when the manufacturers update their firmware or release new models. Therefore, to get the most accurate and current configuration guidance, we strongly recommend that you refer to the documentation provided by the manufacturer. If you need help setting up newer equipment that does not match the description in this topic, contact us at support@portnox.com.
  1. In the Meraki portal, navigate to Teleworker gateway > Configure > Groups.
  2. Edit the default Unassigned group or create a new security group.
  3. In Group Settings click on Add Wi-Fi network and specify the SSID of your Wi-Fi network.
  4. In the Meraki portal, navigate to Teleworker gateway > Configure > Wireless settings and update the status of one of the SSIDs to Enabled.
  5. In the SSID settings:

    1. In Security type, select WPA2 Enterprise.
    2. In Authentication, select My RADIUS server.
    3. In RADIUS servers, click on Add radius server and enter your Cloud RADIUS server details.
    4. Click on Save.