Ethernet 802.1X configuration – Cisco Meraki Z3 Teleworker Gateway

In this topic, you will learn how to configure the Cisco Meraki Z3 Teleworker Gateway to work together with Portnox™ Cloud and 802.1X RADIUS authentication for wired Ethernet connections.

Warning: This topic contains documentation prepared by our support agents more than 12 months ago. It may not cover the newest models or the newest interfaces of NAS devices. We’re working on bringing you updated documentation for NAS devices in the near future. However, the methods of setting up third-party devices may still change when the manufacturers update their firmware or release new models. Therefore, to get the most accurate and current configuration guidance, we strongly recommend that you refer to the documentation provided by the manufacturer. If you need help setting up newer equipment that does not match the description in this topic, contact us at support@portnox.com.
  1. In the Meraki portal, navigate to Teleworker gateway > Configure > Addressing & VLANs and verify that the VLANs are enabled in the Routing section.
  2. In the Per-port VLAN Settings, edit the relevant port(s):

    1. Set the Enabled option to Enabled.
    2. Set the Type to Access.
    3. Select the relevant VLAN.
    4. Select the Access policy type: 802.1x or MAC authentication bypass.
    5. In RADIUS servers, click on Add radius server and enter your Cloud RADIUS server details.
    6. Click on Update.